Instagram: Modeling the install for the NEW Nuna Pipa Lite
Here at Bambi Baby, we are modeling the install for the New Nuna Pipa Lite. First, we would like to point out that the load leg on the bottom of the base is tucked underneath it, and it pops out completely. This is how the seat is anchored to the car. We are modeling this install on the NEW Volkswagen Atlas. The anchor points are on the bottom of the seat back and allow the Nuna Pipa Lite to tuck into the seats, and the rigid latch connects to the car. The Volkswagen Atlas also comes captain seating and adjustable seats for the greatest amount of comfort and support
The Nuna Pipa Lite is tough, yet lightweight while consistently promising to be protective and portable. The new PIPA lite weighs in less than every infant car seat available - at 5.3 pounds (does not include canopy or insert). The PIPA lite includes Aeroflex™ foam and True lock™ base installation, all while exceeding American safety standards. From the fabric to the foam and beyond, each element is smartly sourced to be both flame resistant and contain no added fire retardant chemicals.
(Pictured: Nuna Pipa Lite)
The Pipa Lite includes the True lock base installation that tightly and securely locks into any car. It also includes integrated harness holders with a luxe leatherette carry handle. The canopy is removable, provides full coverage with its UPF 50+ canopy, and includes an easy flip out eyeshade. This all inclusive seat pairs perfectly with all Nuna car seat adapters, and, at a mere 3.5 pounds, boasts to be the lightest infant car seat available.
From fabric to foam and beyond, each element is smartly sourced to be both flame resistant and contain no added fire retardant chemicals that could be touching the baby. The PIPA lite promises to be both incredibly portable and seriously protective. This support and protection starts with the materials. The Aeroflex foam is lightweight, resilient, and minimizes force transferred to baby by absorbing and diffusing energy. The PIPA is carefully created with high performance materials including aerospace aluminum and featherweight fabrics. Its steel reinforced True lock base installation makes the setup simple and incredibly safe. The “crumple zone” within the stability leg absorbs impact and minimizes force to baby.
The PIPA must be installed in a vehicle with the accompanied PIPA™ series base, and does so rear-facing in a snap. There is incredible side impact protection for ultimate baby safe keeping. The PIPA comes with a removable headrest that is patented Tailor tech™ memory foam that provides a comfortable custom fit and grows with baby. The micro-knit fabric is both cushy and comfortable, and the five point harness keeps little ones in place. The NUNA PIPA is FAA certified for aircraft when used with base and is recommended use: 4 to 32 pounds, and up to 32 inches.
Come in today to check out the Nuna Pipa Lite, and have the car seat of your choice safely installed into your car by a Bambi Baby expert. They promise to help to keep your little one safe and comfortable.